|
Left/Right Directional Buttons: Arrows pointing to left and
right below the screen.
Up/Down Directional Buttons: Arrows pointing up and down
to the right of the screen.
Function/Select Button: Button with red dot on it.
Read/Power On Button: Button in far right/bottom corner with
green slash on it.
Turning Your Pager On
1. Press the Read/Power On Button.
Turning Your Pager Off
1. Press the Function/Select button.
2. Press the left arrow button to move the cursor to "TURN
PAGER OFF"
3. Press the Function/Select button twice to turn the pager off.
Receiving and Reading Messages
When a message is received, your pager alerts and displays a flashing
triangle symbol. A flashing bull’s eye in the top left corner
of the standby screen alerts you that you have new, unread messages.
1. Press any button to stop the alert.
2. Press the Read/Power On button to display your message.
Accessing the Function Menu
Displays across bottom of screen and provides access to the features
described in this guide.
1. Press the Function/Select Button.
2. Press the left and right arrow buttons to move within the function
menu.
3. Press the Function/Select Button again to select an option.
Backlighting
The pager’s backlighting illuminates in low-light conditions
when any button is pressed. You can manually activate or deactivate
the back light at any time by pressing and holding the Function/Select
button for 2 seconds. If no other buttons are pressed, the back
light automatically turns off.
Setting the Time and Date
1. Press the Function/Select button to display the function menu.
2. Press the left arrow button to move the cursor to "SET TIME
AND ALARM."
3. Press the Function/Select button to display the set-time screen.
4. Press the right arrow button to move the cursor to the hour digit.
5. Press the up or down arrow buttons to adjust the hour.
6. Press the right arrow button to move the cursor to the minute
digit.
7. Press the up or down arrow buttons to adjust the minute.
8. Repeat the process for each set of digits: AM/PM/24 hr., month/day/year.
9. Press the Function/Select button to activate the time and date
change.
Setting the Alert Mode
The alert can be set as either audible or silent.
1. Press the Function/Select button to display the function menu.
2. Press the left arrow to move the cursor to the speaker icon.
(A speaker is displayed if the pager is in the silent alert mode,
prompting you to enter the audible mode if desired; a speaker with
a slash through it is displayed if the pager is in audible alert
mode, prompting you to enter the silent mode if desired.)
3. Press the Function/Select button to select the desired alert
mode. If the selected mode is audible, your pager emits a short
chirp; if silent, your pager vibrates.
Setting the Alert Pattern
NOTE: Your pager must be in the audible alert mode to select the
alert pattern.
Your pager has a standard alert (1), seven different "pleasing"
alerts (2 – 8), and a chirping alert (the music note). You
can also select no alert (speaker with a slash through it).
1. Press the Function/Select button to display the function menu.
2. Press the left arrow button to move the cursor to the music note,
then press the Function/Select button.
3. Press the left or right arrow buttons to move the cursor to the
desired alert. The pager gives a sample of each alert when scrolling
through the selections.
4. Press the Function/Select button to activate the alert.
Deleting Messages
You can delete a message from memory while you are viewing the message
or through the function menu.
1. Press the left or right arrow buttons to select the message you
want to delete from memory.
2. Press the Function/Select button to display the function menu.
3. Press the right arrow button to move the cursor to "DELETE
MESSAGE."
4. Press the Function/Select button to receive confirmation of the
request.
5. Press the Function/Select button to delete the message.
To delete all messages from memory:
1. Press the Function/Select button to display the function menu.
2. Press the right arrow button to move the cursor to "DELETE
ALL MESSAGES."
3. Press the Function/Select button twice to delete all unlocked,
un-alarmed, and read messages.
Battery Gauge
The battery gauge indicator is located on the status screen and
keeps you informed of the battery energy level. The five indicators
range from full to low.
Battery Information
Your pager is designed to operate with a single AA-size alkaline
battery. To install or replace the battery, place the pager face
down and proceed as follows:
1. Unlock the battery door by sliding the door latch away from the
battery door.
2. Slide the battery door in the direction of the arrow (toward
the outer edge).
3. Lift the battery door away from the housing to remove it. Lift
the battery out of the battery compartment, taking note of the positive
(+) and negative (-) markings on the battery and the pager housing.
CAUTION: When inserting a new battery, be careful not to
insert it backwards, as doing this
will erase ALL messages stored or locked in memory. |
