|
Directional Control Buttons: Arrow
buttons pointing to the left and to the right, directly below screen.
Function/Select Button: Button with red dot on it.
Read/Reset Button: Button with green slash on it.
Accessing the Function Menu
1. Press the Function/Select button.
2. Press the left or right directional buttons to move within the
function menu.
3. Press the Function/Select button again to select an option.
Turning Your Pager On
1. Press the Read/Reset button. Your pager will alert and show
a "bull’s eye" in the upper left corner. The time
and date appear at the bottom of the display.
Turning Your Pager Off
1. Press the Function/Select button to display the function menu.
2. The "TURN OFF" icon flashes when this menu item first
appears.
3. Press the Function/Select button to select the "TURN OFF"
function. Press it again to turn your pager off.
Receiving and Reading Messages
When receiving a message, your pager alerts and displays a
small triangle.
1. Press any button to stop the alert.
2. Press the Read/Reset button to display your message.
NOTE: A flashing "bull’s eye" in the top left corner
of your display indicates a message has been received, but has not
yet been read. Your pager will beep intermittently until it is read.
Backlighting
1: Press and hold the Function/Select button for 2 seconds.
Setting the Time and Date
1. While in the function menu, move the cursor left to the
SET TIME icon (the clock), using the directional buttons.
2. Press the Function/Select button to display the SET TIME screen.
The cursor flashes in the hour position. Advance to the desired
hour by pressing the left directional button.
3. Move the cursor to the minute field by pressing the right directional
button.
4. Repeat the process for each field hour, minute, AM/R/24hr/day/month/year.
5. Press the Function/Select button to initiate the change.
Setting the Alert Mode (Silent/Audible)
1. Press the Function/Select button to display the function
menu.
2. Press the left directional button to move the cursor to the AUDIBLE
MODE or SILENT MODE icon. The AUDIBLE MODE icon appears if the pager
is in silent mode, and the SILENT MODE icon appears if the pager
is in audible mode.
3. Press the Function/Select button to select the desired alert.
Setting the Alert Pattern
1. Press the Function/Select button to display the function
menu.
2. Press the left directional button to move to the alert icon (a
music note).
3. Press the Function/Select button to display the SET ALERT screen.
4. Move to the desired alert and press the Function/Select button
to initiate the alert change.
The selected alert number flashes while a 2 second sample plays.
Deleting Messages
You delete a message from memory while you are viewing it or
through the function menu.
1. Select the message you with to delete from memory.
2. Press the Function/Select button to display the function menu.
3. Press the right directional button to move the cursor to the
DELETE MSG icon.
4. Press the Function/Select button to receive confirmation of the
delete request.
5. Press the Function/Select button to delete the message.
Battery Gauge
A low battery icon appears in place of the date at the onset
of low battery conditions. An
Audible low battery alert is also heard at that time.
Battery Information
NOTE: The battery door is hinged and does not need to be removed
to replace the battery.
Your Advisor Pro is designed to operate with a AAA-size alkaline
battery. To replace battery:
1. Unlock the battery door by sliding the door latch up with your
thumb.
2. Slide the battery door to your right (toward the outer edge).
3. Lift the battery door toward you to install or replace the battery.
Put batter in negative (-) side first.
CAUTION: Do not insert the battery backwards! All messages
stored and/or locked in memory
will be erased. |
