|
On/Read/Select Button: Green
Button
Light/Reset Button: Black, Rectangular Button on Left Side
of Pager
Menu/Scroll Button: Black Button With Triangle
Turning Your Pager On
Press the On/Read/Select to turn your pager on. Your pager gives
an alert by either a sound or a vibration, indicating it is on.
After displaying the power-up screen, the time of day, the date,
and an alert indicator are shown in the standby screen.
Turning Your Pager Off
1. Press the Menu/Scroll button repeatedly until "PAGER OFF?"
is displayed.
2. Press the On/Read/Select button to select that option.
Receiving and Reading Messages
Your Bravo LX can receive up to sixteen 20-character messages. When
a message is received, the pager alerts for eight seconds.
1. Press any button to stop the alert.
2. Press the On/Read/Select button to display the message.
3. To return to the standby screen, press the Light/Reset button
on the side of the pager, twice.
To move to the next screen, press the On/Read/Select button. The
last screen of each page will display the message slot number and
the time the page was received. If a message is not read, the pager
gives a reminder alert every two minutes until all messages are
read.
Turning The Backlight On And Off
1. Press the Light/Reset button on the left of the pager to
turn the light on.
2. Press the button again to turn the light off. The light turns
off automatically two seconds after returning to the standby screen.
Changing Alert Modes
Press the Menu/Scroll button once. Either "SILENT?"
or "AUDIO?" will be displayed, depending on the current
mode. To change to the mode displayed, press the On/Read/Select
button.
Selecting an Audible Alert
1. Press the Menu/Scroll button repeatedly until "SET
ALERT?" is displayed.
2. Press the On/Read/Select button to select that option. The current
alert number is displayed and the pager gives a sample of the alert
tone.
3. Press the Menu/Scroll button until the desired alert type is
displayed. As each type is displayed, the pager gives a sample of
the alert tone.
4. Press the On/Read/Select button to select the alert. When messages
are received, your pager gives the selected alert only when in the
audible mode.
Setting the Time
1. Press the Menu/Scroll button until "SET TIME?"
is displayed.
2. Press the On/Read/Select button to select that option. The hour
flashes.
3. Press the Menu/Scroll button to change the hour. Press the On/Read/Select
button to switch to the minutes. The first digit of the minutes
flashes. Follow the previous instructions to set the minutes, AM/PM,
and 12/24 hour modes.
4. Press the Light/Reset button twice to return to the standby screen,
when finished.
Setting The Alarm
1. Press the Menu/Scroll button until "SET ALARM?"
is displayed.
2. Press the On/Read/Select button to select the alarm on/off sequence.
3. Press the Menu/Scroll button to turn the alarm on or off. Press
the On/Read/Select button to switch to the hours. The hour flashes.
Follow the above instructions on setting the time.
Setting The Date
1. Press the Menu/Scroll button until "SET DATE?"
is displayed.
2. Press the On/Read/Select button. The month flashes.
3. Press the Menu/Scroll button until the desired month is displayed.
Press the On/Read/Select button to switch to the day. The day flashes.
4. Press the Menu/Scroll button until the desired day is displayed.
Press the Light/Reset button twice to return to the standby screen.
Erasing Messages
1. From the standby screen, press the Menu/Scroll button until
"ERASE ALL?" is displayed.
2. Press the On/Read/Select button. ALL UNPROTECTED MESSAGES will
be erased. This option is only displayed if there are messages in
the memory.
3. To erase each message individually, press the Menu/Scroll button
twice while the message is displayed on the screen and the "DELETE?"
prompt is displayed.
4. Press the On/Read Select button to delete the message and return
to the standby screen.
Battery Information
Your Bravo LX pager is designed to operate with an AAA-size
alkaline battery. This battery should last you from 2 – 6 weeks
(battery life depends on frequency of use). Please note that consistent
use of the silent or vibrate mode will reduce the life of your battery.
To change your battery, slide the battery door located on the bottom
of the pager, to the right. Make sure that the battery door lock
located on the right side of pager, is unlocked. After replacing
the battery, slide the battery door to the left to secure the door
and slide the door lock downwards. |
