| Buttons
READ – Left button with green stripe
MENU - Middle button with up arrow
SELECT – Right button with right arrow
Turning the Pager On
1. Press the READ Button. The pager will alert indicating that
the pager is on.
2. The power-on symbol and an alert indicator will appear on the
screen to indicate whether the pager is in the Silent or the Audible
mode.
Receiving and Reading Messages
1. When a message is received, the pager will alert for 8 seconds:
2. Press the READ button to stop the alert.
3. Press the READ button again to display the message.
4. Press the SELECT button twice while reading the message to return
to the main status screen. Messages that contain more than 12 characters
are displayed on a second screen. The arrow symbol indicates that
there are additional screens. The last screen of the message displays
the time that the message was received.
5. If the message is left unread, the pager emits a reminder alert
every 2 minutes, and the number of unread messages is displayed
on the screen.
Turning the Pager Off
1. Press the MENU button until the "PAGER OFF?" prompt
appears on the display.
2. Press the SELECT button to turn the pager off.
3. The clock will be displayed on the screen, but the "ON"
indicator will not.
Turning on the Light
1. Press the SELECT button while the clock or a message is
displayed to turn the light on.
2. To turn the light off, press the SELECT button again while the
message or the clock is displayed, or allow it to timeout automatically
after 8 seconds.
3. The light cannot be turned on while scrolling through the menu.
Changing the Alert Mode
1. Press the MENU button. Either "SILENT?" or "AUDIO?"
will appear depending on which mode the pager is currently in. For
the pager to vibrate, it must be in the Silent mode.
2. To change the alert mode, press the SELECT button while your
choice appears on the display.
Setting the Alarm
1. Press the MENU button until "SET ALARM" appears
on the display
2. Press the SELECT button.
3. Press the MENU button until the correct hour is reached.
4. Press the SELECT button . Continue pressing the MENU / SELECT
buttons until you have completed the programming.
Pager Auto
1. You can set the pager to turn on and off at designated times.
2. Press the MENU button until your choice of "PGR AUTO?"
or "PGR MANUAL?" appears on the display.
3. If you press the SELECT button while "PGR AUTO?" is
displayed, the pager will turn on and off at the times that appear
on the display.
4. If you press the SELECT button while "PGR MANUAL?"
is displayed, you will need to turn the pager on and off yourself.
5. Press the READ button to return to the main status screen after
viewing the on/off times.
Set Pager Auto
1. Press the MENU button until "SET AUTO" is on the
display.
2. Press the SELECT button
3. To set the "On" time, press the MENU button until the
desired hour appears. When the desired hour is displayed, press
the SELECT button to move to A.M. or P. M. Press the MENU button
again to change from A.M. or P.M. Repeat this step to set the Off
Time.
4. Press the READ button to return to the main status screen.
Setting the Clock
1. Press the MENU button until "SET TIME" appears
on the display.
2. Press the SELECT button to set the pager clock.
3. Press the MENU button until the desired hour appears. To move
to the next digit, press the SELECT button. Repeat this process
for each field (hours, minutes, AM/PM, and 12/24 hour).
4. Press the READ button to return to the main status screen.
Locking Messages
1. To lock a message, press the MENU button while reading the
message. A lock will appear on the display to indicate that the
message is protected.
2. To unlock a message, press the MENU button while reading the
locked message.
3. Locked messages cannot be erased, overwritten by new messages
when memory is full, or lost while replacing the battery. Up to
four messages may be locked at one time.
Clearing the Memory
1. Press the MENU button until "CLEAR?’ appears on
the display.
2. Press the SELECT button. All read, unlocked messages will be
erased.
3. The "CLEAR?" prompt will only appear if there are messages
in memory. |
