| Turning the Pager On:
Set the power switch to ON (in the middle "M", or
all the way down "N"). Your pager emits and alert tone,
blinks, and displays all digits on the LCD showing that your pager
is operating normally.
(If your pager does not emit an alert tone or emits a continuous
tone, the battery is exhausted. Please replace the battery).
Receiving a Message:
1. Press in the power switch to stop the alert and view the
page
2. An "RP" on the display indicates that the message is
a duplicate
3. In the event that a message is longer then 12 digits, an arrow
on the upper right end of the display indicates that the message
continues. Press the power switch to display the remaining digits.
Deleting a Message:
1. The message on the display will say "DELETE" after
16 seconds
2. Delete the message by pressing in the power button |
